Supported hardware list

  • NOTICE
  • Positioning stage controllers
  • Galvanometric scanner controllers
  • Laser sources
  • Cameras
  • Power meters
  • Sensors
  • Other hardware
  • Your hardware is not included?

NOTICE

For information on the functionality and compatibility of specific controller or device, its model, version, and firmware version, please get in touch with us at [email protected].

Please note that the implementation and the functionality differs depending on the device.

Positioning stage controllers

  • ACS Motion Control
  • Aerotech A3200/ Automation1
  • Polaris Motion Control
  • Newport XPS (accurate triggering only in XY)
  • Delta TAU PMAC, Power PMAC
  • Physik Instrumente via GCS (only point-to-point motion)
  • Zaber X-MCB2/X-MCC
  • Galil DMC-41×3 (only point-to-point motion)
  • Googol GTS 
  • HALaser E1701M (only point-to-point motion)
  • Standa 8SMC5-USB single axis (only point-to-point motion)
  • SigmaKoki GSC-01/GSC-02 (only point-to-point motion)
  • Elmo Motion Control (point-to-point and PVT motion for on-fly processing)

Galvanometric scanner controllers

  • RTC3/4/5/6 by SCANLAB GmbH
  • XL SCAN by SCANLAB GmbH
  • SCANmotionControl by SCANLAB GmbH
  • Raylase SP-ICE3
  • Polaris Motion Control
  • Aerotech A3200/ Automation1
  • Cambridge ScanMaster
  • Canon GB-511/GB-501
  • SmartMove
  • HALaser E1701/E1803
  • Newson CUA32
  • precSYS 5-Axis Scanner by SCANLAB GmbH

Laser sources

  • Light Conversion Carbide/Pharos
  • Trumpf TruPulse nano (SPI R4/G4)
  • Iradion nanosecond and femtosecond series
  • Amplitude Tangerine/Satsuma
  • Lumentum PicoBlade
  • Luxinar SCX 30 (former Rofin)
  • Luxinar LXR series
  • Spectra-Physics Spirit
  • Trumpf TruMicro (OPCUA)
  • Coherent Monaco

Cameras

  • Basler (Pylon 7.2 / 6 / 5.2 / 5)
  • IDS imaging
  • Cognex with inSight Vision
  • Mightex
  • Allied Vision
  • PointGray and Flir (via Spinnaker SDK)
  • HikVision (MV-CA060-11GM)
  • Matrix Vision 2.40
  • Cameras with genTL up to 1.5 and GenICam up to 3.2
  • Cameras with DirectShow drivers

Power meters

  • Gentec S-Link-2/M-Link/P-link/Integra
  • Coherent PowerMax
  • Ophir Nova II
  • Analog Sensors

Sensors

  • Keyence CL-3000 (serial and TCP/IP) and LK-G5000 (serial)
  • Panasonic HL-G125 S-J
  • Precitec CHRocodile
  • Analog height sensors
  • SCANLAB Open Interface Extension
  • Micro-Epsilon IFD2421 and C-Box

Other hardware

  • DLP/DMD projection generators
  • SLM via HDMI
  • Optogama expanders and attenuators
  • Altechna PowerXP/MoTex (only certain device versions are supported)
  • Thorlabs shutter
  • Attenuator controlled by supported motion controllers

Your hardware is not included?

We can implement other hardware as well. Due to the flexible architecture of DMC, new hardware implementation does not take long.

For example, adding another component like a laser, sensor, etc. usually takes up to two weeks. Please reach out to us for more details.